Recent content by mosaicman

  1. M

    Let's talk Octoprint

    One last note, for best stability, I lowered the baud to 115200. This change was made in Octoprint and the firmware configuration.h file. Since this change I have never had any issue on either of my gMax printers. 115200 is plenty of speed for gcode commands.
  2. M

    Let's talk Octoprint

    So my Octopi is now working 100% with no connectivity issues. I re-flashed my SD card, changed the power supply cable ensuring it was 2A capable, and changed the usb port that connected the gMax to the Octopi to the printer. One of these three seemed to be the fix.
  3. M

    Let's talk Octoprint

    Digging more into this, I think it may be a power issue. I do not think the usb power cable that I was using to power the pi could handle 2A. Will be changing this out and retesting. Will re-post if this was the fix.
  4. M

    Let's talk Octoprint

    jmckeone, I am experiencing similar issues with my octopi and gMax 1.5+ losing connection a few hours into the print. Did you ever resolve this? If so, what was the fix? Thanks!