- License Type
- CC-A
- Compatible With
- gMax 1.5+, gMax 2
gMax 1.5+ and gMax 2 configuration files for Cura 4.4.1.
Installation instructions can be found in the zip file.
Please note Cura 4.4.1 had changed the way configuration files are handled.
Definitions:
Defines printer
Quality:
Defines different print quality settings
Variants:
Defines nozzle sizes
From what we've gathered, if you have different quality settings and you have different variants, you MUST create a quality setting for EVERY machine for EVERY material (you can use generic_PLA) for EVERY variant.
Generally change all the settings in the Global files:
gmax2_global_Normal_Quality.inst
This way whenever you select one of these quality definitions its the same across several fields
For the nozzle files change only the settings you need for the exact nozzle:
gmax2_03_PLA_Normal_Quality.inst
(add the nozzle variant, and maybe speed)
For the material files change only the settings you need for the exact material:
gmax2_PLA_Normal_Quality.inst
(material temps, maybe speed, maybe retraction etc)
https://ultimaker.com/software/ultimaker-cura