gMax 2 Firmware - Marlin 1.1.9 200929

Update 09/29/2020 :
+ Adjusted thermal runaway threshold for heated bed. TR will trigger if bed is 6+ degrees outside target temperature for 30 seconds or more.

Update 07/29/2020 : Added in new hex files.
+ Adjusted thermal runaway threshold
+ Addition of advanced thermal runaway script. (Triggers Filament runout script in the event of a thermal runaway in order to save the current print.)
+ More probing points for bed leveling
+ Added "Level & Preheat" tool in gMax Tools
- Removed "Clean Nozzle" script from gMax Tools

Update 6/29/2020 : Dual extruder firmware is now available in the zip file


Used on the gMax 2 3d printer. This firmware ships pre-installed on your gMax 3d printer.





The new firmware includes .hex files and you can simply upload using xLoader or Cura slicing software.

We recommend using xLoader to install firmware. Make sure to set baud rate to 115200
https://github.com/xinabox/xLoader/releases/

Refer to this tutorial for a simple walk through on installing firmware with Cura:
http://forum.gcreate.com/index.php?threads/installing-marlin-firmware-using-cura-slicer.1039/

If you are uploading via the Arduino environment, we recommend using version 1.9.0. Also make sure to have the u8glib library installed. We recommend version 2.24.3




The original Marlin github can be found here:
https://github.com/MarlinFirmware/Marlin
Marlin Github changelog:
https://github.com/MarlinFirmware/Marlin/releases/tag/1.1.9



A huge thank you to the entire Marlin Development team. We will be incorporating our changes to the Marlin github and as always our source code is available in the .zip file.