Search results

  1. M

    New SD Card Files for 1.5+

    Noticed that there is a new set of SD CARD files here http://forum.gcreate.com/index.php?resources/gmax-1-5-sd-card-files-1-31-2019.36/ However it says Note: these files are for printers shipped in 2019. I'm confused, does this mean these will not work on 2018 printers because of different...
  2. M

    gMax 1.5 to gMax 2

    I couldn't find the Precision linear motion system used on the new Gmax 2 on openbuildspartstore.com, all the ones they offer use eccentric wheels...
  3. M

    gMax 1.5 to gMax 2

    These Guys? https://openbuilds.com
  4. M

    gMax 1.5 to gMax 2

    I see. It would be AWESOME if you guys can produce some sort of guide "things to know" on how to upgrade if you guys have no plan to offer upgrade kits, As suppose to leaving all of us gCreate'rs in the Dust. I'm typically one of those early adopters aiming for the latest and greatest but now...
  5. M

    gMax 1.5 to gMax 2

    I would love to know if there is a way I can upgrade my gMax 1.5 to gMax 2 Components? I'm willing to pay for upgrades since I have no desire in having a larger printer. Thanks!
  6. M

    Loose Eccentric spacer

    I have one eccentric spacer that I can't seem to tighten, or not sure if It should fit loose. It doesn't wobble but it does rotate freely without any resistance. How do I tighten it?
  7. M

    Leveling X-Axis Arm Calibration Print

    Awesome! ETA? :)
  8. M

    Leveling X-Axis Arm Calibration Print

    Am I missing something? When I print the X-Axis Arm Calibration Print (X-axis probe space ship) it prints way too small. Theres no way of enlarging it either....
  9. M

    Extruder test Jumps on Initial setup Test

    Running the Initial setup script off the SD card files and it gets to the Extruder Test, is it normal for the Extruder to strip or skip filament at about every inch of filament pushed through?
  10. M

    SD Card download for Marlin 1.1.9

    Theres a gMax SD Card Files - Marlin 1.1.8 Firmware is there a SD Card download for 1.1.9 ? or Can we still use the 1.1.8 download?
  11. M

    Gcreate sample print Files

    Hey Guys! I've requested and received some of your 3D printed Sample files that look great! I would like to if possible to get the .Gcode or STL files so I can print them my self and use this as a way to tune my gMax... Im mostly interested in the Injection Mold and the Bracket sample! Thanks!
  12. M

    How to reset Pabystep

    Question, when adjusting the BLTouch the "Hard method" as shown here http://forum.gcreate.com/index.php?threads/adjusting-the-bltouch-z-offset.2035/ Does it matter if I you use a piece of paper as mentioned or the Businesscard method as shown in some other tutorials?
  13. M

    How to reset Pabystep

    Awesome thanks!
  14. M

    How to reset Pabystep

    What im trying to do is for the printer not to use the previous Babystep settings. As its printing I see on the screen the -0.02 Z-offset (I believe its the last babysit settings correct) but then when I go into the Babystepsettings Im expecting it to say -0.02 and its ays 0.00 instead. If I...
  15. M

    How to reset Pabystep

    Wondering how to reset Babystep settings. I basically want to roll the babystep settings back to 0.00. I noticed that while printing the current babystep settings are shown on the print progress screen. Thx!
  16. M

    LCD Flakey when reading from SD

    Wondering if theres a fix for the Flakey/jumpy screen when reading/ navigating files on SD. Thanks!
  17. M

    When to tighten the Anti-Backlash Nut Block

    Sorry I'm so confused. RIght now the screws on my current nut blocks are in their "original position" from when I purchased the printer - where they're not tighten up to add resistance, im confused on why I may need to tighten it. Is this because after some wearing the nut block may become...
  18. M

    When to tighten the Anti-Backlash Nut Block

    Do you mean like dropping on it's own or if with some force by hand?
  19. M

    When to tighten the Anti-Backlash Nut Block

    My printer is a few months old and was wondering how do I know when it's time to tighten or mess with the Anti-Backlash Nut Blocks? I do notice that that one side seem to always seem to be .01MM lower than the other side after a print. I manually adjust the hight and it seem ok after I raise Z...
  20. M

    Missing Screw?

    Ahh I see. ok thanks!