Jack-o Lantern Skull

GORDON.LAPLANTE

Administrator
Staff member
#2
Nice work. As the printer is printing, try just turning the know ob the LCD screen. This speeds up or slows down the print as its printing. Very useful to test the right speeds. (note the printer has a 'lag' when you speed it up or slow it down so it takes about 20 moves to see the new speed).

Also try lowering the extruder multiplier in the slicing program. It looks like the printer is extruding a tiny bit too much plastic or the layer height isn't optimal. Our new default is around 0.25mm to 0.27mm for the 0.5mm nozzle.

Keep up with the images