In the last week or so my printer is having trouble printing the first layer. When I start the print the right side of the bed is fine.I'm getting good adhesion and everything seems to be normal. As it prints to the left the adhesion gets worse and worse and it gets to the point where the left side of the first layer is not sticking at all.
I have not changed anything. I'm using the latest S3D profiles. I have levelled the X axis and ran the level bed from the Prepare menu countless times.
I am including a video to the problem
https://www.dropbox.com/sh/ly3knwklr8nkf1a/AAAYY1e36fAvdCqxehVSPsdBa?dl=0
I have not changed anything. I'm using the latest S3D profiles. I have levelled the X axis and ran the level bed from the Prepare menu countless times.
I am including a video to the problem
https://www.dropbox.com/sh/ly3knwklr8nkf1a/AAAYY1e36fAvdCqxehVSPsdBa?dl=0