Blobs/zits on surface

#1
Hey everyone,
I've been struggling trying to get rid of these zits/ blobs on my print. I would like your help to diagnose the issue. I feel like I've done everything. I added a coasting distance of 1.05mm, messed around with the retraction settings (tried 2mm and 4mm and 15mm), and even bought new filament because I thought there was moisture, but that didn't work, I lowered the temperature and extrusion multiplier (196C and 0.91 respectively). I'm using simplify3D and so I'm not sure what other things I can mess with. Any guesses as to what's going on?
Here is the print:
https://imgur.com/a/N6OTJ
https://imgur.com/gallery/bhOum