Hello all,
Ive ran into a road block with getting my first successful print. For some reason my extruder wont move (rotate). Ive done test on the both the motor and the wires to assure the problem doesn't lie there, and they still work. but for some reason either via printing or controlling it with the LCD the extruder will not rotate. Also, Ive recently had to get a new electronics board, and the problem has continued with both the old and new electronics boards. Meaning Ive ruled out the problem being the wires,the motor,or electronics so Im not really sure where that leaves the problem to lie. Anybody have any ideas of what the problem could be?
I also should add that Ive done some research on the problem and some have said that it has to be at a certain temperature before the extruder begins to rotate...that too has not solved my problem.
Ive ran into a road block with getting my first successful print. For some reason my extruder wont move (rotate). Ive done test on the both the motor and the wires to assure the problem doesn't lie there, and they still work. but for some reason either via printing or controlling it with the LCD the extruder will not rotate. Also, Ive recently had to get a new electronics board, and the problem has continued with both the old and new electronics boards. Meaning Ive ruled out the problem being the wires,the motor,or electronics so Im not really sure where that leaves the problem to lie. Anybody have any ideas of what the problem could be?
I also should add that Ive done some research on the problem and some have said that it has to be at a certain temperature before the extruder begins to rotate...that too has not solved my problem.