Okay, update time. I made some more tweaks and I think I have things down. Per a suggestion I lifted the front left corner of the acrylic using a 1/4" washer and things seem to be sticking better when I do a full-bed print. There is a spot or two (back left corner) that need additional tweaking as the first layer looks a little weak there; but I am going to get some more print time under my belt with this machine first. I may also grab a sheet of BuildTak to apply to the acrylic to help with adhesion, but I am unsure at this time.
Also, my issues with S3D seem to have been corrected. Thanks to an updated S3D profile I can now use S3D to slice and print without any drops into the bed . I am, however, still getting the 2nd extruder grinding a little on the print as it is moving DESPITE having leveled the 2 hot ends to the bed at least once.
I am also seeing some weird "dimpling" the height of the print in 3 different spots. Not sure what that is from.
Pictures of first real print.
First Layer:
Top Layer:
Dimpling:
Also, my issues with S3D seem to have been corrected. Thanks to an updated S3D profile I can now use S3D to slice and print without any drops into the bed . I am, however, still getting the 2nd extruder grinding a little on the print as it is moving DESPITE having leveled the 2 hot ends to the bed at least once.
I am also seeing some weird "dimpling" the height of the print in 3 different spots. Not sure what that is from.
Pictures of first real print.
First Layer:
Top Layer:
Dimpling: