Hello everyone, I'm printing something that should have a flat surface/wall. However, I'm seeing a lot of zits, waves, and an ascending width (after first layer). I'm not sure if my extruder is bumping into the printed object or I am over extruding but I'm hearing a soft thumping sound on some layers. I'm currently printing in an enclosure using plastic and a heated bed that comes with the 1.5+. I'm not sure what my issue is here but I was hoping by providing a picture, you guys could tell me how to get a proper finish.
Thank you for reading!
Here's the link to the picture: https://drive.google.com/file/d/0B-sr-y ... sp=sharing
Thank you for reading!
Here's the link to the picture: https://drive.google.com/file/d/0B-sr-y ... sp=sharing