So now that I got my E3D hot-end and have the Simplyfy3D settings dialed in I am successfully printing with NinjaFlex. It's easily my favorite material so far and my brain is going a little crazy over the possibilities with it.
To start though, I had been wanting some kind of cushion for the "feet" of my gMax, plus I needed it a little higher up because of long threaded rods, so I designed little vibration dampening "booties" for the feet. I've added pictures below for how they turned out. I'll add the STL file in a 2nd post in case anyone else wants to print some up with a flexible filament.
Next I realized I wanted some vibration dampening on my NEMA17 motors so I made X and Y axis motor gasket/dampeners and for the Z axis ones. I'll put pictures of them up in a 2nd post along with the STL's for anyone who might also want to print some up.
Happy printing everybody!
Caleb
To start though, I had been wanting some kind of cushion for the "feet" of my gMax, plus I needed it a little higher up because of long threaded rods, so I designed little vibration dampening "booties" for the feet. I've added pictures below for how they turned out. I'll add the STL file in a 2nd post in case anyone else wants to print some up with a flexible filament.
Next I realized I wanted some vibration dampening on my NEMA17 motors so I made X and Y axis motor gasket/dampeners and for the Z axis ones. I'll put pictures of them up in a 2nd post along with the STL's for anyone who might also want to print some up.
Happy printing everybody!
Caleb
Attachments
-
110.8 KB Views: 1,785
-
227 KB Views: 1,785
-
226.5 KB Views: 1,785