Menu
What's new

Control Heated Buildplate

J

jlawyer

New Member
#1
#1
Does the GMax XL have a digital output available that could be turned high/low with G-Code?

I ask because I would like to setup a solid state relay to power the heated build plate off after the build completes. I don't need to control temperature.
 
oneaday

oneaday

Member
#2
#2
jlawyer said:
Does the GMax XL have a digital output available that could be turned high/low with G-Code?

I ask because I would like to setup a solid state relay to power the heated build plate off after the build completes. I don't need to control temperature.
Click to expand...

I dont think so, but I've solved it with a simple 433mhz on/off remote switch
 
J

jlawyer

New Member
#3
#3
Right now I use a digital lamp timer and program it to turn off about 20min after the build should be complete...

Would be nice to use g-code and have it turn off after the print is complete.
 
You must log in or register to reply here.