What are the most common materials used for 3D printing?

Contains general gMax or other topics relating to the 3D industry.

What are the most common materials used for 3D printing?

Postby 3dtech » Mon Aug 14, 2017 1:24 am

Most materials currently used in 3D printing are plastics.all print in a thermoplastic called ABS, using a process called Fused Deposition Modeling (FDM).

Image

following are Most Popular 3d printing materials used

Polylactic Acid (PLA). This versatile and relatively low cost printing material that is readily available and can be used for many articles. It’s not the strongest of the printing polymers available but is extremely useful depending upon your application. It is derived from corn starch and is therefore biodegradable over time. PLA shapes find great use as removable shape used in modern investment casting processes. The finished, printed shape is coated in a ceramic film before being burnt out and the resulting void filled with molten metal to form the proper part.

Acrylonitrile Butadiene Styrene (ABS). This is a tough material that can be used to create finished parts that will put up with the rigours of everyday use. Slightly problematic if the feedstock is kept in a humid area, ABS works best when thoroughly dry. As with all thermoplastics, filaments are available in a range of colours.

High Impact Polystyrene (HIPS). This is s a tough durable material akin to ABS though not the cheapest option. HIPS uses Limonene as a solvent which tends to make the finished part smell slightly of lemons, but that’s not all bad is it. The heater element of the printer needs to be controlled quite finely with this material otherwise there will be a fair degree of warping as the hot material is placed on the cooling layer, but with smaller parts (which you’ll probably want to do anyway since it’s an expensive base material) the speed of printing should be just fine to prevent warpage.
Image

ninjaflex filament - flexible 3d printing


3d printing with pva - polyvinyl alcohol – This is used as a dissolvable support material or for special applications.

printing on polycarbonate (PC) – Polycarbonate requires high-temperature nozzle design and is in the proof-of-concept stage.
SOFT PLA - polylactic acid – Is rubbery and flexible, available in limited colors and sources. As 3D printing spreads, may get easy to find.

taulman alloy 910 nylon

Image

3d printing vadodara ahmedabad surat rajkot gujarat india
These users thanked the author 3dtech for the post (total 0):
3dtech
 
Posts: 37
Joined: Wed Dec 02, 2015 11:36 pm
Location: MONA TILES COMPOUND, NR. CHHANI CIRCLE, CHHANI ROAD, VADODARA - 390002. GUJARAT, INDIA.
Has thanked: 0 time
Been thanked: 0 time

Return to gMax General Forum

Who is online

Users browsing this forum: No registered users and 2 guests