Colorfabb PLA filament
Pros:
-Beautiful and solid colors. Not translucent
-Little clogging
-Easy to begin printing with compared to other materials
-Biodegradable
-Little shrinkage compared to ABS
Cons:
-Weak plastic compared to ABS or other materials
-Expensive compared to other materials
-1.75mm spools only come in 750 grams (as of this writing). 2kg is standard
Printing Tips:
-Print 1st layer around 199 degrees C and all other layers at 208 degrees C
-Do not expect parts to hold up to severe stresses
-Print with fan set to min of 80% and max of 90% or 100%
Example Print:
Pros:
-Beautiful and solid colors. Not translucent
-Little clogging
-Easy to begin printing with compared to other materials
-Biodegradable
-Little shrinkage compared to ABS
Cons:
-Weak plastic compared to ABS or other materials
-Expensive compared to other materials
-1.75mm spools only come in 750 grams (as of this writing). 2kg is standard
Printing Tips:
-Print 1st layer around 199 degrees C and all other layers at 208 degrees C
-Do not expect parts to hold up to severe stresses
-Print with fan set to min of 80% and max of 90% or 100%
Example Print:
Attachments
-
76.5 KB Views: 2,504