Ok, so before I make changes to the start g code. This is what my current g code looks like.
G28 ; home all axes
G1 Z5 F5000; Raise nozzle
M218 T1 X45 Y0; Set 2nd extruder offset
M201 X500 Y500; Set X and Y acceleration values
M204 S500; Set default acceleration
What do I need to add or remove in order to get it to raise up off the bed and heat up to desired temp, before the print starts. (also I'll uncheck that box you mentioned).
you said if I uncheck the box, the nozzle will try to start printing without the desired temp being reach first, so in my start g code what do I need to add or remove to make it raise up and heat up before printing.
thanks.
G28 ; home all axes
G1 Z5 F5000; Raise nozzle
M218 T1 X45 Y0; Set 2nd extruder offset
M201 X500 Y500; Set X and Y acceleration values
M204 S500; Set default acceleration
What do I need to add or remove in order to get it to raise up off the bed and heat up to desired temp, before the print starts. (also I'll uncheck that box you mentioned).
you said if I uncheck the box, the nozzle will try to start printing without the desired temp being reach first, so in my start g code what do I need to add or remove to make it raise up and heat up before printing.
thanks.