configuration

[RED_TITLE]gMax 1.5+ and gMax 2 configuration files for Cura 4.6.1.[/RED_TITLE] Installation instructions can be found in the zip file. Please note Cura 4.6.1 had changed the way configuration files are handled. Definitions: Defines printer Quality: Defines different print quality settings...

[RED_TITLE]gMax 1.5+ and gMax 2 configuration files for Cura 4.4.1.[/RED_TITLE] Installation instructions can be found in the zip file. Please note Cura 4.4.1 had changed the way configuration files are handled. Definitions: Defines printer Quality: Defines different print quality settings...

Note: these files are for the gMax 2 Printer The zip file contains test prints, configuration setting and slicing configuration files that shipped with your gMax printer on the SD card.

Note: these files are for printers shipped in 2019 The zip file contains test prints, configuration setting and slicing configuration files that shipped with your gMax printer on the SD card.

These config files are only for printers using Marlin 1.1.1 or earlier. For printers using Marlin 1.1.8 download the SD card files instead! gMax SD Card Files - Marlin 1.1.8 Updates: 170914 - Completely revamped the S3D profiles to be much cleaner and intuitive. Split Single and Dual...

For use with slic3r 1.2.9 http://slic3r.org/ To install, open slic3r and select "Load Configuration Bundle". Make sure to back up any old config files to avoid being overridden. Config files are optimized for the gMax 1.5+ but they should work with previous models.