- License Type
- CC-A-SA
- Compatible With
- gMax 1.5+
These config files are only for printers using Marlin 1.1.1 or earlier. For printers using Marlin 1.1.8 download the SD card files instead!
gMax SD Card Files - Marlin 1.1.8
Updates:
170914 - Completely revamped the S3D profiles to be much cleaner and intuitive. Split Single and Dual profiles apart. E3D is the new default value for the profiles.
170127 - Added the 3d models back to the zip file. They were missing before.
161117 - Added new nozzle sizes. Slowed down general speeds for higher quality. Increased 1st layer height. Offset origin so prints begin at center.
160921 - Changed start gcode from F500 to F5000 to speed up beginning of print.
160520 - Fixed Start gcode section
Installation:
1. In Simplify3D click "File > Import FFF Profile".
2. To select the profile click "Edit Process Settings" and under the "Select Profile" drop down menu select "gCreate gMax 1.5 XT+"
Zip File includes gMax 1.5+ and gMax 1.5XT+ 3d printer file for S3d background
Installation:
1. In Simplify3D click "Tools > Options". (In MacOSX open preferences menu).
2. Go to "Machine" tab.
3. Under "Printer Models" click "Add" and select the correct gMax printer model.
gMax SD Card Files - Marlin 1.1.8
Updates:
170914 - Completely revamped the S3D profiles to be much cleaner and intuitive. Split Single and Dual profiles apart. E3D is the new default value for the profiles.
170127 - Added the 3d models back to the zip file. They were missing before.
161117 - Added new nozzle sizes. Slowed down general speeds for higher quality. Increased 1st layer height. Offset origin so prints begin at center.
160921 - Changed start gcode from F500 to F5000 to speed up beginning of print.
160520 - Fixed Start gcode section
Installation:
1. In Simplify3D click "File > Import FFF Profile".
2. To select the profile click "Edit Process Settings" and under the "Select Profile" drop down menu select "gCreate gMax 1.5 XT+"
Zip File includes gMax 1.5+ and gMax 1.5XT+ 3d printer file for S3d background
Installation:
1. In Simplify3D click "Tools > Options". (In MacOSX open preferences menu).
2. Go to "Machine" tab.
3. Under "Printer Models" click "Add" and select the correct gMax printer model.