slicing configuration

  1. gCreate

    gMax 1.5+ SD Card Files - 1-31-2019 190128

    Note: these files are for printers shipped in 2019 The zip file contains test prints, configuration setting and slicing configuration files that shipped with your gMax printer on the SD card.
  2. gCreate

    Cura 3.5 - Installing updated gMax Configuration FIles 3.5.1

    Cura 3.5.1 currently has outdated configuration files and we have submitted them for review on the github for the next release. Use these configuration files as a workaround until they are fully integrated. Installation instructions can be found in the zip file and they must be followed for the...
  3. gCreate

    Cura 3.1 gMax 1.5+ Single and Dual Extruder Configuration Files 18.01.19

    Configuration files for Cura 3.1. Cura is powerful free slicing engine with many advanced features. Refer to this forum post for installation instructions:
  4. gCreate

    Cura 2.5 gMax Configuration Files 17.05.03

    Configuration, profile and stl files for Cura 2.5 Cura 2.5 is a sophisticated free open source slicing engine which will export gcode files compatible with the gMax printer. Cura has several unique features to improve your printing experience and reduce time. Follow the instructions on how to...
  5. gCreate

    gMax 1.5+ Simplify 3D Config v17.09.14

    These config files are only for printers using Marlin 1.1.1 or earlier. For printers using Marlin 1.1.8 download the SD card files instead! gMax SD Card Files - Marlin 1.1.8 Updates: 170914 - Completely revamped the S3D profiles to be much cleaner and intuitive. Split Single and Dual...
  6. gCreate

    gMax 1.5+ Slic3r 1.2.9 v 160405

    For use with slic3r 1.2.9 To install, open slic3r and select "Load Configuration Bundle". Make sure to back up any old config files to avoid being overridden. Config files are optimized for the gMax 1.5+ but they should work with previous models.