Cura 4.7 Config Files for gMax 3D Printers. 200831

These must only be used with Cura 4.7.
https://ultimaker.com/software/ultimaker-cura

Installation instructions can be found in the zip file.

Upgraded version from 14 to 15.

For Single and Dual Extruder gMax Printers.

Definitions:
Defines printer

Quality:
Defines different print quality settings

Variants:
Defines nozzle sizes

From what we've gathered, if you have different quality settings and you have different variants, you MUST create a quality setting for EVERY machine for EVERY material (you can use generic_PLA) for EVERY variant.

Generally change all the settings in the Global files:
gmax2_global_Normal_Quality.inst

This way whenever you select one of these quality definitions its the same across several fields

For the nozzle files change only the settings you need for the exact nozzle:
gmax2_03_PLA_Normal_Quality.inst
(add the nozzle variant, and maybe speed)

For the material files change only the settings you need for the exact material:
gmax2_PLA_Normal_Quality.inst
(material temps, maybe speed, maybe retraction etc)