gmax 1.5+

  1. D

    Gmax 1.5 + upgrade help. Y axis problems.

    I have upgraded my Gmax 1.5 to the 1.5+ and I have everything running fine but when it's prints the Y axis dose not move up properly and the print just pouts more material in the last layer. It dose move up but just not to what it needs. I have looked at the power to the motor and this is not...
  2. gCreate

    gMax SD Card Files - Marlin 1.1.8 Firmware 180321

    A zip file containing the files located on the SD card shipped with your printer. This includes the initial setup files, slicing configuration files, sample files and manuals. These files are only for printers with Marlin 1.1.8 firmware installed. Printers shipped after Feburary 15th, 2018 are...
  3. gCreate

    gMax 1.5+ Marlin 1.1.8 - Full Graphic Display Only 18.02.19

    [RED_TITLE]Marlin 1.1.8 Firmware[/RED_TITLE] Used on the gMax 1.5+ 3d printer with a Full Graphic Display. This new version of Marlin includes several new features for your gMax printer and improvements to the existing firmware. Please read the "READ ME" pdf in the zip file before use. The new...
  4. gCreate

    gMax 1.5+ Fan Shrouds (4 Styles) v 1

    All the fan shrouds for the for the gMax 1.5+. We combined all the fan shrouds into a single zip file. Contains: Single J-Head Fan Shroud Dual J-Head Fan Shroud Single E3D Fan Shroud Dual E3D Fan Shroud
  5. gCreate

    gMax 1.5+ BLTouch brackets (4 styles) v 1

    BLTouch bracket for the gMax 1.5+. We combined all the bltouch brackets into a single zip file. Contains: Single J-Head Bracket Dual J-Head Bracket Single E3D Bracket Dual E3D Bracket
  6. gCreate

    gMax 1.5+ Volcano Fan Shroud and BLTouch Bracket v 1

    A new longer fan shroud and bltouch bracket when installing the E3D volcano hotend on the gMax 1.5+ http://e3d-online.com/E3D-v6/Volcano/Vo ... ack-1.75mm
  7. gCreate

    gMax 1.5+ All 3D Files v 15.12.09

    File includes all 3d parts including single and dual extruder. Slicer settings vary per part. Experiment and come up with your favorite combination but typically use 4 walls and 65% infill. License: Creative Commons - Attribution - Share Alike. http://creativecommons.org/licenses/by-sa/3.0/
  8. gCreate

    gMax 1.5+ Keyestudio SINGLE Extruder Full Graphic LCD v

    Modified marlin firmware used on the gMax 1.5+ series of printers. This firmware is used with Single Extruder printers with Keyestudio electronics and a Full graphic LCD display. Firmware does NOT include auto bed leveling. Please note this is not a repository for firmware changes and you...
  9. gCreate

    gMax 1.5+ Keyestudio (Red) DUAL Extruder Full Graphic LCD v 16.03.08

    Modified marlin firmware used on the gMax 1.5+ series of printers. This firmware is used with Dual Extruder printers with Keyestudio electronics and a Full graphic LCD display. Firmware does NOT include auto bed leveling. Please note this is not a repository for firmware changes and you should...
  10. gCreate

    gMax 1.5+ Gadgets 3D (Blue) SINGLE Extruder v 15.07.20

    Modified marlin firmware used on the gMax 1.5+ series of printers. This firmware is used with Single Extruder printers with Gadgets 3D (blue) electronics and the Gadgets 3D LCD screen. Firmware does NOT include auto bed leveling. Please note this is not a repository for firmware changes and you...
  11. gCreate

    gMax 1.5+ Gadgets 3D (Blue) DUAL Extruder v 15.08.10

    Modified marlin firmware used on the gMax 1.5+ series of printers. This firmware is used with Dual Extruder printers with Gadgets3D (blue) electronics and the Gadgets 3D LCD screen. Firmware does NOT include auto bed leveling. Please note this is not a repository for firmware changes and you...
  12. gCreate

    gMax 1.5+ Marlin 1.1.1 v 17.09.25

    Change log: 9-25-17 -Lowered Jerk settings to 8 to reduce chance of layer shifting -Added dual E3D configuration file 9-14-17 Note: if you have a new drive gear (with teeth running the whole length of the gear) you must make sure to set your steps/mm for the extruder to 93.86 instead of the old...
  13. gCreate

    gMax SD Card Files v 17.09.18

    A zip file containing the latest SD card files for your gMax printer. This includes the initial setup files, slicing configuration files, sample files and manuals.
  14. gCreate

    2017 gMax 1.5+ Getting Started Manual v 17.11.15

    11-15-17 Additional notes regarding SD card and USB Connection. 7-17-17 Additional changes to reflect proper bed leveling procedure. 5-17-17 A new version has been added to reflect the changes in Marlin 1.1.1 This manual is will familiarize you with your gMax printer when you first receive...
  15. gCreate

    gMax 1.5+ Printer Calibration Object v17.04.05

    The gMax printer calibration object is the first print you will complete on your gMax printer. It ensures your printer is operating correctly and is a useful tool used to set the bed leveling probe height and level the X-Axis.
  16. gCreate

    Filament Spool Bearing Bracket v16.04.20

    This unique spool holder will fit all gMax versions. If you find your filament brackets are a bit too tight, this new spool holder has much less friction and will allow your spools to unwind freely since it runs on a 608 bearing. It also includes a filament director arm with a ball joint...